specification 625 watts ? universal input 90264 vac ? continous short circuit protection ? en550022 class b ? low cost ? 6, 15 and 25 watt versions ? nonstandard outputs available ? 3 year warranty aep series input input voltage ? 90-264 vac input frequency ? 47-63 hz input current ? 0.5/0.25 a max at 115/230 vac (6 w & 15 w) 0.7/0.3 a at 115/230 vac (25 w) inrush current ? 15/30 a max at 115/230 vac (6 w) 25/50 a max at 115/230 vac (15 w & 25 w) power factor ? meets en61000-3-2, class a output output voltage ? see tables initial set accuracy ? see tables minimum load ? no minimum load requirement start up delay ? 6 w 100 ms, 15 w 270 ms, 25 w 280 ms hold up time ? 10 ms typical at 115 vac, 60 ms typical at 230 vac line regulation ? see tables load regulation ? see tables ripple & noise ? 1 % pk-pk max (see note 2) overvoltage protection ? 125% typical overload protection ? trip and restart (hiccup mode) short circuit protection ? constant current (6 w) continuous (auto recovery) (15 w & 25 w) temp. coefficient ? 0.05%/c xppower.com general efficiency ? typically 67% for 6 w, 75% for 15 w, 80% for 25 w isolation ? 3000 vac input to output switching frequency ? 30-200 khz (6 w) 30-35 khz typical (15 w & 25 w) power density ? 0.75 w/in 3 (6w), 1.87 w/in 3 (15 w) 1.88 w/in 3 (25 w) mtbf ? >200 khrs to mil-hdbk-217f at 25 c, gb environmental operating temperature ? 0 c to +60 c, derate linearly from +40 c at 100% load to 60% load at +60 c (6 w & aep15 5 v-13.6 v), 50% load at 60 c (25 w & aep15 15 v-24 v) storage temperature ? -20 ? c to +85 ? c operating humidity ? 93% rh, non-condensing operating altitude ? 2000 m emc & safety emissions ? en55022 class b conducted and radiated harmonic currents ? en61000-3-2 class a voltage flicker ? en61000-3-3 esd immunity ? en61000-4-2, level 2 perf criteria b radiated immunity ? en61000-4-3, level 2 perf criteria a eft/burst ? en61000-4-4, level 2 perf criteria b surge ? en61000-4-5, installation class 2, perf criteria b conducted immunity ? en61000-4-6, level 2 perf criteria b dips & interruptions ? en61000-4-11, 5 % u t 10 ms, perf criteria b, 70 % u t 500 ms, perf criteria c safety approvals ? en60950, ul1950, csa c22.2 no.234 cul acdc
aep06 models and ratings notes 1. initial set accuracy is at 60% full load. 2. add a 0.1f e.l capacitor to output for ripple & noise measurement at 20 mhz bw. 3. line regulation measured from 100 vac to 240 vac, full load. 4. load regulation measured from 60% to full load and from 60% to 20% load (60% 40% load). acdc output voltage output current ripple & noise (2) initial set accuracy (1) line regulation (3) load regulation (4) model number 4.2 v 1000 ma 1% 3% 1% 4% aep06us042 5.0 v 1200 ma 1% 3% 1% 4% aep06us05 6.0 v 1000 ma 1% 3% 1% 4% aep06us06 6.5 v 650 ma 1% 3% 1% 3% AEP06US065 7.0 v 650 ma 1% 3% 1% 3% aep06us07 7.5 v 650 ma 1% 3% 1% 3% aep06us075 8.0 v 650 ma 1% 3% 1% 3% aep06us08 9.0 v 650 ma 1% 3% 1% 2% aep06us09 10.0 v 600 ma 1% 3% 1% 2% aep06us10 12.0 v 500 ma 1% 3% 1% 2% aep06us12 mechanical details 6 & 15 watt models 2.83 (72.0) 1.38 (35.0) 0.50 (12.7) 0.67 (17.0) 70.87 1.97 (1800.0 50.0) 2.05 (52.0) 2.71 (68.9) 2.83 (72.0) 1.38 (35.0) 2.83 (72.0) 1.38 (35.0) 0.54 (13.7) 0.71 (18.0) 0.75 (19.0) 70.87 1.97 (1800.0 50.0) 2.05 (52.0) 3.53 (89.7) 0.67 (17.0) 70.87 1.97 (1800.0 50.0) 2.05 (52.0) 3.31 (84.0) 2.83 (72.0) 1.38 (35.0) 0.71 (18.0) 70.87 1.97 (1800.0 50.0) 2.05 (52.0) 3.40 (86.3) 0.14 (3.5) 0. (1 0.37 (9.5) all dimensions are in inches (mm) weight: aep06: 0.3 lb (135 g) aep15: 0.35 lb (160 g) output plug: 0.22 x 0.10 x 0.37 (5.5 x 2.5 x 9.5) to order us add suffix -us to model number to order european add suffix -eu to model number to order australian add suffix -au to model number to order uk add suffix -uk to model number
07-sept-11 acdc aep1525 models and ratings notes 1. initial set accuracy is at 60% full load. 2. add a 0.1f e.l capacitor to output for ripple & noise measurement at 20 mhz bw. 3. line regulation measured from 100 vac to 240 vac, full load. 4. load regulation measured from 60% to full load and from 60% to 20% load (60% 40% load). output voltage output current ripple & noise (2) initial set accuracy (1) line regulation (3) load regulation (4) model number 5.0 v 2.00 a 1% 2% 1% 4% aep15us05 6.0 v 1.50 a 1% 2% 1% 4% aep15us06 7.5 v 1.60 a 1% 2% 1% 4% aep15us075 9.0 v 1.40 a 1% 2% 1% 4% aep15us09 12.0 v 1.00 a 1% 2% 1% 4% aep15us12 13.6 v 1.00 a 1% 2% 1% 4% aep15us136 15.0 v 1.00 a 1% 2% 1% 4% aep15us15 18.0 v 0.83 a 1% 2% 1% 4% aep15us18 24.0 v 0.63 a 1% 2% 1% 4% aep15us24 3.3 v 4.00 a 50 mv pk-pk 2% 1% 6% aep25us033 5.0 v 4.00 a 1% 2% 1% 6% aep25us05 12.0 v 2.10 a 1% 2% 1% 5% aep25us12 15.0 v 1.67 a 1% 2% 1% 3% aep25us15 18.0 v 1.40 a 1% 2% 1% 2% aep25us18 24.0 v 1.05 a 1% 2% 1% 2% aep25us24 mechanical details 25 watt models 3.19 (81.0) 2.20 (56.0) 3.19 (81.0) 3 3.19 (81.0) 3 70.87 1.97 (1800.0 50.0) 1.89 (48.0) 3.19 (81.0) 2.20 (56.0) 70.87 1.97 (1800.0 50.0) 1.89 (48.0) 3.19 (81.0) 2.20 (56.0) 3 3.19 (81.0) 3 3.19 (81.0) 7 3.19 (81.0) 2.20 (56.0) 70.87 1.97 (1800.0 50.0) 1.89 (48.0) 70.87 1.97 (1800.0 50.0) 1.89 (48.0) all dimensions are in inches (mm) for 15 watt model mechanical details see 6 watt model weight: 0.485 lb (220 g) output plug: 0.22 x 0.10 x 0.37 (5.5 x 2.5 x 9.5) to order us add suffix -us to model number to order european add suffix -eu to model number to order australian add suffix -au to model number to order uk add suffix -uk to model number
|
